Scale Foam

Scale Foam

Rebond Foam Machines-Rebond Carpet Pad,scrap Foam Usage (Shredder For Pillow & Cushion Stuffing, Rebonding For Carpet Underlayer

REBONDING FOAM PROCEDURE 

GENERAL DESCRIPTION :

ReboTec - recycling of trimmings
"ReboTec is a process, in which slab stock waste and trimmings are comminuted into flakes, then compressed into PU-bonded rectangular or cylindrical blocks that are subsequently cut to size. "

STEPS:

①    grinding or shredder

②    Grinded granule mixed with polyurethane adhesive compressed in the mould

③    Cut to size

DETAILS EXPRESSION FOR THE STEPS:

⑴ grinding or shredder :

" Grinding is a recycling process, in which foam trimmings are converted into loose flakes(by our HHRG-22/11).These are then ground into a powder through shear action in a roller mill. Larger particles are filtered and then fed to the mill until all particles fall into the specified The performance data of a crushing system for large-scale industrial use shown on the left are impressive: upto300 kg flakes are ground into powder of lessthan0.2 mm grain size every hour. The on-line metering unit feeds up to 70 kg of powder per minute into the polyol stream. With a second metering unit running in parallel, up to 140 kg of powder per minute can be processed. "

Grinding granule size :

2mm , 8mm , 16mm ….. The size of the granule (flakes) is depend on the density and application of the bonded foam,

Density below 100kg/cubic meter bonded block most tend to size of 8 or 16 mm for the flakes, which most apply for mattress and carpet .size of 2mm nearly used for some high density areas , such as shoes pad , ect.

⑵ Grinded granule mixed with polyurethane adhesive:

"The trimmings are shredded into flakes before being wetted with a polyurethane adhesive, then blended in a mixer(tank) and discharged into a mould. Since the loose flakes have a significantly lower bulk density than the finished block, the flakes are compressed inside the mould. Rebounded foam is subsequently formed by adding hot steam and pressure. "

1>   steam, here, to speed up the dry of inside adhesive .it’s several times faster than the one without steam

2>    pressure, compressed into PU-bonded rectangular or cylindrical blocks into the mould

3>    Steam and compressed happen in the same time.

⑶ cut to size , when bonded block finished ,you can cut the rebonding foam into the size that you wanted .

All process finished.

Recyle machines needed for the project as following :

 

1ST

HHRG-22A SHREDDER

you can use our general shredder to crushing your scrap foams , you see , our HHRG-22A is designed for shredded variouse different kinds of foams ,we strongely suggest you to use our this model , which is very convient , easy to reparing , you can have a look of the video by click below link :

 

2ND :

mould and recyle pressing systerm

use our square block mould recyle systerm to mould and glue your shredded flakes into one whole block , this mould and pressing systerm allow you to mould flexible and hard pu panel flakes into mould size , you can have look of the video :

 

 

3RD

HORIZONTAL or vertical  TRIMMING AND CUTTING

 

horizontal or vertical splitting to trimming your block into regular size ,and cut sheet size as you wanted , you can have a look of the video :

 

the most confusing part is which horizontal cutting model to use to cut your hard pu block , yes , vertical cutting machine , of course , we are sure , it's no problem to cut hard foam , because , it's can cut honeycomb paper , eva ... hard materials , what's more , it's cutting bladeknife can be changed to saw ,

you see you can use our  HHHS- 1650R/2150R rebond foam horizontal cutting /splitting , it's bladeknife , not saw, however , for your hard pu foam , we usually use splitting saw HHHS-1250RI/1650RI

 

for horizotal splitting machine , we need you to choose one of it , others , we can insure you , ok

 

mao

About the Author

California Kingsnake yellow foam poo Serious answers please.?

so i fed my king snake yesterday and about 10 min ago she pooed or what ever out a yellow liquid and after a few seconds it hardened into some condense sort of foam thing like pure yellow no brown no fur clumps nothing is this normal? i just bought her a week ago and i never had anything like this from my other snakes.

by the way im not sure if this will help or not but she is a female. 1.5 yrs 5.5-6ft. oh and yesterday when i fed her the mouse he put up a fight and left a small scratch under her jaw/neck area it doesn't look like it when through the scale and when i touch it. she doesn't seem to react to it like it doesn't hurt her

oh and an other thing. when she moves some times i can feel and some times hear her bones seem like the are cracking? like when you crack your fingers? im not sure if this is normal or not either sense i never owned a king snake before. only pythons.

should i make an appointment with the vet?

the foam poo is perfectly normal. that's actually what its supposed to look like. comes out liquid and hardens to a white or yellow.

if the mouse just scratched the scale, u have nothing to worry about. if the snake bled, u could go buy some snake healing aid to make sure she heals fine, no infection and to make sher her scales don't mess up b/c of it.

....not sure about the cracking noise. if she doesn't seem effected by it, and isn't moving weird or seem in pain, i wouldn't worry about it.

Building with scrolled out foam in b tec scale #2