Cnc Alum

Cnc Alum

Lathes Q&A

Besides using a lathe, what are some suggestions or exsisting mitt tools that can produce accurate dowels?
im trying to handcraft some earings (plugs) and for the time being i dont want to use any power tools. does anyone have any direction on how to get a precise rounded piece of wood? ive been using compases, rulers, squares, files, sandpaper,...

Best Lathe for Bowl Turning?
I've searched and searched and search some more and can't find clear answers. What size lathe do I need to turn bowls? What additional attachments and tools will I obligation? What is the best lathe in the $500 (give or take) range for wood turning. Thanks to adjectives of you who help in mortgage. If...

Best Lathe machine/training for hardcore fine artist?
I want something beginner under 3,000, ideally 800 or smaller quantity. Willing to pay up to 5,000 if necessary for a pious one. Are there any that work with metal And Wood... and other stuff close to stone or plastic? What other gear do I need? What's the best training? I applied for...

Best place for mini lathe trappings?
What are some good sources for getting mini lathe accessories such as sudden change tool posts, chucks, and all the other right little things? There are almost unlimited options online, but I like to look at and hold things formerly I buy them, and I like to shops used a fair bit. Do most...

Biggest ever Lathe device available(use or display) contained by India?
today i came across 12 ft long and 6 ft height and it may be it weigh around 2-3 ton)...lathe gadget...wanna know any other lathe(massive size) u came across....or seen over lattice ..do pass me the link... You are lucky its a few and far between sight if you have...

Calc problem dealing beside cost functions and lathe?
So I haven't taken calc in a while, and I need it immediately. The problem is in a Mech. Engineering class: the Cost per part can be estimated as C=M(v/V)+T(V/v) where on earth M =$22/part, T=$9.25/part, and the cutting speed v=115 ft/min. what V will result in the minimum total cost? can...

Can a 4th-axis CNC mill essentially do CNC lathe turning?
I am a newb to the world of CNC machining so forgive my ignorance, but I want to know if a 4-axis CMC mill can essentially do the equivocal operations of a CNC lathe? What is confusing me is that the "4th-axis" is a rotary table head and tail stock...

Can a steel shaft w/ a keyway be turned down on a lathe, or will the keyway basis the lathe bit to snap stale?
yes you can, although shaft could be hardened. most machining is done previously hardening and tight tolerances are finished ground. a good machinist will know what speed to be running shaft on lathe and proper nurture...

Can a wood lathe be used on solid acrylic tubing?
im wondering if a wood lathe (such as an older craftsman type) can be used to lathe a peice of solid acrylic ranging from 1/2" to 3" within size if run at a slower speed Yes - but on a slower speed. And watch the heat person generated, if the...

Can any one provide me the difference between cnc lathe and conventional lathe?
Metal lathe or metalworking lathe are generic terms for any of a large class of lathes designed for precisely machining relatively firm materials. They were originally designed to machine metals; however, next to the advent of plastics and other materials, and with their inherent versatility, they are...

Can anyone explain to me where on earth i can download fanuc cnc lathe almanac for free?
Check out this link below: http://www.cnczone.com/forums/showthread… Hope it helps Source(s): Based on user's experience

Can I bore a balance hole near a small metal lathe?
Question is, does any operation have to be dead-center? If I wanted to bore a balance hole in a piece of round rod can that be done? As opposed to insensible in the middle? BTW, i'm not talking in the region of using a drill press, so those answers...

Can I sticco over a cinder block wall short using the metal lathe?
Not expected. What will it cling to? You should use a concrete bonding agent first. You could try troweling on a thinset-type mortar, very undernourished, as a scratch coat. The thinset has finer sand and is vastly sticky. Once you have a thin division take a board...

Can I use a chisel on balsa wood or is it best w/ sandpap. on a lathe?
depends on what your doing chisels are more accurate if you know what your doing If you are turning balsa , would use , really sharp turning tools just to round off the stock. It is so soft that sand "to shape "...

Can i use a wood lathe to clear a taper contained by a tube of acrylic?
stretching your earlobes has turned into a trend today and at 15 years old i enjoy mine stretched to 3/4ths of an inch. i want to make some money off this. so my cross-question is, can a wood lather (there the cheapest) be used...

Can someone trade name a gun near merely a mill and lathe?
Is it possible to make an entire pistol with purely a 3-axis mill and a lathe? with the right cuting tools for it. Is it? anyone know? has anyone ever made an homemade gun formerly? You can engender just about anything near a good mill and lathe. You...

Can you use a metal lathe for wood?
my brother broke my good cue it tapered to 9mm, i am pretty sure.... he brought me a spanking new one today and its 12 mm it is like playing with a tree trunk to the other cue, i can't even screw the bubble that much compared to the other, i am...

Can you use a mini metal lathe for small wood work similar to pen making?
thinking of buying a mini lathe and would like to do both metal and some small wood stuff As far as turning wood is concerned it would work. The problem is the tool rest for metal turning is different from a wood lathe.

Can you use a watchmakers lathe to do wood miniatures?
I have a chance to find a watchmakers lathe and was wondering if i can do wood miniatures on it? yes you can use u can know the working of lathe in http://www.TheMetalMachine.com/Machines/Lathes/Automatic_Lathe.html Source(s): through http://www.TheMetalMachine.com/

CNC Fanuc controls, how to program lathe and mills?
Is there anyone that can give me a crash course within Fanuc CNC controls? What sequence do the codes go in, could you hand over an example of a few programs and what sequence " eg. tool change, rapid, interpolation, etc." It would be too complicated to pass an entire course...

Cnc how do you run stepper motors on a Sherline lathes.?
for simple parts, you need the Sherline CNC mounts (replaces hand-cranks), stepper motors, a 2-axis stepper motor controller/driver. And some software to control the whole entry. If you want to use your lathe to make a cam or something, you might find it difficult to do with an off-the-shelf...

CNC lathe machining experience....?
I need someone who can program and operate a HAAS and/or Mori Seiki CNC lathe machines. If Anyone is interested or anyone knows someone who might be interested please consent to me know. the shop is in San Fernando Valley, Southern California. Thank you Z i do know some folks that might be interested in relocating...

CNC lathe put somebody through the mill!?
Ok, recently my friend started a company and he wants me to label the 3d design's of his product for him. I've done that but I don't know what I have to do to make it so a CNC mill can cut out the design. Right immediately the file is in .prt format...

Cnc lathe sanctuary operating procedure?
cnc lathe............so whats the question? if you cant use a lathe......then the cnc is opening out of your league........... if you can then its pretty much the same..... contained by the programming I tend to go with more cuts, smaller amount depth...but thats just the way I run one...

Cnc lathes and mills are used for what exactly? any break this type of craftsmanship individual replaced by tech?
these machines are used to grind or cut steel, alum, plastic, etc. a lot of them have already gone to cnc and some other numerical controls, machinist be paid good money running them, programmers make more, but the top of the...

CNC Machine is used for what purpose? What is a lathe domestic device?
I would like to know the full details where the CNC Machines are used, and why the mark given to it? I would also like to know the difference between the CNC and lathe machines. Lathe big tool people use to label circular and curved shapes for...

Connected load(KW X P) funds what for a lathe?
I have seen surrounded by a catalog that connected load(KW X P)= 5 KWX 4 of a lathe.What doest it mean? wht P represents? The P stands for the number of poles. What it is essentially saying is that it is an 1800 RPM motor (if used surrounded by a 60Hz...

Conversion of 1HP 3phase lathe motor to single phase 240V?
I wish to convert my Colchester Bantam motor and switchgear from 3 phase 415V to single phase 240V. I am looking for a supplier to supply what I need, any guidance would be appreciated. I must retain the forward/reverse capability of the motor. The current 3 phase motor code is...

Current i doing assignment about turning and lathe.can i know the supremacy for turning and lathe? thankfulness?
Well to start with there are two types of lathes, one for wood and one for metal,plastics,etc. Both are used to shape substance whose finished shape will be round. A little specifics and I could help more. Source(s): Former "A" Machinist

Cutting Tapers on the Lathe?
I did my manufacturing technology in my university which requires us to produce an item from lathe and milling mechanism manually. So based on my experience: If you wish to do taper, you call for to check the tools availability which come together with the machine. Some are supporting (need a lot of experience to...

More Lathesquestions please visit : MachineryFAQ.com

About the Author

MachineryFAQ.com

Cutting a switch knob from 6061 aluminum using a CNC mill as a lathe