Ceramic Ball

Ceramic Ball

Steel Bearing Balls……………………………

THIS IS SMALL, ROUND, LOOKS LIKE A BALL, BUT ACTUALLY IS A BASE OF THE MOTION OF BEARINGS WIDELY USED IN MECHANICAL, NOW ALSO IN CIVIL, ELECTRICAL AND SPACE APPLICATIONS.

 

These bearings which were earlier only formed of steel, brass are now become trendy too.

With the influx of latest and advance technology our new engineering boon is ceramic balls. Now the question comes on the need of the invention of ceramic balls.

 

Reasons for giving ceramic balls special preference:-

 

Ceramic balls got extreme abrasion and corrosion resistance. Their low coefficient of thermal expansion have extended their utility in the bearings, as with the increase of heat they resist bearing friction, as they absorbs less heat therefore saves the cost of coolant which is normally required otherwise.

 

Not only is this light weight of ceramic balls in comparison to steel balls help them in getting comparatively low centrifugal force which is inverse to result high speed while rotation.

 

Ceramic bearings got one more advantage over steel balls of being chemically non reactive, which makes them suitable to be used in tough conditions safely.

 

Unlike steel balls these bearings are also safe as they act as an insulator against electric charge.

 

Ceramic balls have fewer tendencies to change in shape while heat generation at high speed motion hence resists friction with their rolling contacts.

 

Unlike steel balls ceramic balls are non magnetic, this is double advantage for any kind of application.

 

Ceramic balls are harder to steel balls which ensure their comparative long life.

 

As a result of light weight they have another advantage on being economic for exports.

 

Following grades are normally available:

- Ruby

- Silicon nitride         
- Aluminina      
- Zirkonia           
- Safhire

 

Technology introduction and new inventions on these industrial balls is not ended over here, it is an ongoing process and will keep on revolutionizing the industry with its best.

 

 

Shraddha Avasthi

For

Indian Industrial exporters

For more interesting facts visit:

http://www.indianindustrialexporters.com/More_Bearings.aspx

 

About the Author

Shraddha Avasthi
For
Indian Industrial exporters

Why is a ceramic heat emitter better?

Why is a ceramic heat emitter a better source of heat than a black light heat lamp- for a ball python? And can it sit in a fixture directly on top on the mesh lid as the black light heat lamp can or would it require a stand? I see they come in 60-250 Watt. Right now, I use a 75 watt black light bulb. What ceramic heater wattage is best for a 20 gallon vivarium? Thanks!

Ceramic heat emitters do not deliver any visible light when they are used at night to heat an enclosure. They do get kinda hot sometimes. It is best to use a rheostat or, a thermostat with any heating device to help regulate temperatures and, the heat output of the device. A stand would probably be best. I have one on one of my enclosures and I never really have to worry about the screen top from ever becoming red hot because a lamp or a heat emitter is pressed too close up against it. A snake could easily burn itself by touching a screen top that has a super hot spot on it. For a 20 gallon, a lower wattage (50-60) emitter hooked up to a device heat controller is recommended for night time heating. I do use red night lights as well when I want observe the nocturnal behavior of some of my ball pythons. The light from these bulbs is very low-vis to snakes and, they also generate heat.

Vibrant Automated Ceramic Ball Bearing Tester