Air Blade
 |
 Syma S018 Air Wolf Picoo Helicopter Brand New 3 Channels Coaxial Rotor Blade $28.99 Time Remaining: 12d 19h 14m Buy It Now for only: $28.99 |
 New Tail Rotor Blade Prop for Air Hogs Heli CAGE r c helicopter spare propeller $0.01 (1 Bid) Time Remaining: 2d 23h 14m |
 E Flite EFLH3005 Main Air Frame w Hardware Blade mSR $5.87 Time Remaining: 16d 12h 12m Buy It Now for only: $5.87 |
 Crash Kit Blades Set Tail Connect H 425G Air Shark Revolution 4 CH Helicopter $7.95 Time Remaining: 26d 18h 56m Buy It Now for only: $7.95 |
 Syma S018 Air Wolf Picoo Helicopter Brand New 3 Channels Coaxial Rotor Blade $41.71 Time Remaining: 26d 7h 2m Buy It Now for only: $41.71 |
 AIR HOGS SWITCHBLADE Switch Blade Red Gray Grey NEW $39.95 Time Remaining: 15d 17h 25m Buy It Now for only: $39.95 |
 NEW AIR HOGS R C SWITCH BLADE TRANSFORMING FLIER R W $37.00 Time Remaining: 29d 22h 52m Buy It Now for only: $37.00 |
 Syma S018 Air Wolf Picoo Helicopter Brand New 3 Channels Coaxial Rotor Blade $62.77 Time Remaining: 4d 7h 26m Buy It Now for only: $62.77 |
 AIR HOGS Switchblade Red Plane Stunt Flier Switch Blade $42.99 Time Remaining: 27d 13h 37m Buy It Now for only: $42.99 |
 Syma S018 Air Wolf Picoo Helicopter Brand New 3 Channels Coaxial Rotor Blade $39.99 Time Remaining: 18d 12h 26m Buy It Now for only: $39.99 |
 Air Hogs R C SWITCHBLADE Transforming STUNT FLIER Plane Switch Blade NEW $38.95 Time Remaining: 7d 12h 4m Buy It Now for only: $38.95 |
 2 New Tail Rotor Blade Props for Air Hogs Heli CAGE r c helicopter spare parts $9.56 Time Remaining: 9d 6h 26m Buy It Now for only: $9.56 |
 Stabilizer Blade Balance Bar air hog Reflex Helix Heli $9.56 Time Remaining: 18d 5h 13m Buy It Now for only: $9.56 |
 Tail Rotor Blade for air hog r c Havoc Heli Stinger indoor rc helicopter prop $0.01 (1 Bid) Time Remaining: 4d 17h 44m |
 2 Tail Rotor Blade Prop for air hog rc Havoc Heli Sport $9.56 Time Remaining: 8d 17h 10m Buy It Now for only: $9.56 |
 Tail Rotor Blade for air hog r c Havoc Heli Stinger indoor rc helicopter prop $8.80 Time Remaining: 5d 6h 34m Buy It Now for only: $8.80 |
 New Tail Rotor Blade Prop for Air Hogs Heli CAGE r c helicopter spare propeller $7.96 Time Remaining: 25d 23h 17m Buy It Now for only: $7.96 |
 STABILIZER BLADE for air hog REFLEX helix rc helicopter $9.56 Time Remaining: 3d 4h 6m Buy It Now for only: $9.56 |
 4 New Rotor Blades for Air Hog rc Mini Storm Launcher $14.36 Time Remaining: 25d 1h 13m Buy It Now for only: $14.36 |
 2 Tail Rotor Blade for air hog r c Havoc Heli Stinger $9.56 Time Remaining: 8d 17h 11m Buy It Now for only: $9.56 |
 Tail Rotor Blade for air hog r c Havoc Heli Razor Razer $9.56 Time Remaining: 8d 17h 21m Buy It Now for only: $9.56 |
 2 Tail Rotor Blade Prop for air hog rc Havoc Heli Shark $9.56 Time Remaining: 8d 17h 9m Buy It Now for only: $9.56 |
 2 Tail Rotor Blade Prop for air hog r c Havoc Heli Navy $9.56 Time Remaining: 8d 17h 7m Buy It Now for only: $9.56 |
 5 Tail Rotor Blades for air hog r c havoc heli rc helicopter propeller prop part $19.96 Time Remaining: 5d 6h 25m Buy It Now for only: $19.96 |
Air Blade
A Square Air Fan
Industrial Pressure Blower Co. now makes a new design of a centrifugal general ventilating fan - Square Fan, in direct drive and belt drive configurations. Arrangement 4 direct drive square fans are ideally suited for a wide range of clean-air applications reuiring a tight footprint. Typical uses include pneumatic conveying, product drying, process cooling, and exhaust on clean-side of dust collection systems.
Some design features of the Industrial Pressure Blower Co. Square Fans include:
- Ten sizes from wheel size 10" to 30"
- Capacities up to 30,000 CFM airflow @ 20" WG pressure
- Choice of backward inclined, airfoil and backward curve wheel
- Four discharge configurations
- Narrow-width design permits higher speed and pressures
The following accessories are avilable:
* Clean-out door - available as a quick opening latch type door that swings open on hinges after cam levers have been turned, or flash bolted type with closely spaced studs to keep door securely sealed with Neoprene foam tape gasketing
* Shaft seals or Teflon shaft hole closures
* Outlet damper - single or multi blade, parallel blade or opposite blade designs, manually operated or complete with mounted electric or pneumatic actoator, for on / off or modulating air flow control
* Inlet screen
* Base rails with rubber-in-shear or spring type vibration isolators
* Inlet volume control with variable inlet vanes - external or nested in the inlet cone, for manual or automatic air flow control
* Housing drain - tank flange furnished in scroll of fans with down blast discharge, half couplings in housing drive side on all other discharges
* Spark resistant and explosion proof construction
* Safety drive guards
* Extended grease tube fitting
* High temperature fan construction with a shaft cooler assembly and high temperature paint
* Flanged inlet and outlet
* Stainless steel construction of SST 316, SST 304 or SST 347 stainless alloy are available for corrosive applications
Industrial Pressure Blower Co. Square Fans incorporate non-overloading BI impeller desings: the motor can be sized for the operating horsepower of the fan and not oversized, thus increasing motor efficiency. Heavy gauge spinning inlet with airflow diverter permits smooth air flow and close wheel tolerances.
Three different wheel designs on SQB Square Fans provide the widest choice in applications suitability, efficiency, sound, and cost. All of them feature the backward inlcinged non overloading horsepower chracteristic, where the horse power curve reaches a peak and then decreases even as air flow increases. This feature allows maximum brake horsepower calculation and motor selection that prevents electrical system overloading even if system pressure changes.
True aerodynamic airfoil blade shape allows stable operation from wide open to closed off; ideal for clean iar applications such as building ventilation with variable air volume system control or clean industrial gas handling. Aerodynamic single surface blade shape of backward curve wheel offers alternative selction points to the Airfoil wheel and also provides stable operation from wide open to closed-off. Flat, single thickness backwardly inlined plades are suited for applications from clean air to those where dust and limited material is present in the airstream and where airfoil shapes are not recommended due to material build up that closes unbalance and vibration.
For additional information please refer to http://www.industrialpressureblower.com/fan.html.
Susan Terlitski
Canadian Industrial Process Air Systems Designer
Industrial Pressure Blower Co.
http://www.industrialpressureblower.com/contact.html
http://www.industrialpressureblower.com/airhandler.html
About the Author
Canadian air-handling systems designer.
Mrs. Siouzanna Terlitskaia, nis-co@nis-co.com
Canadian Air Systems
http://nis-co.com
would a reverse blade sword be more difficult to use then a regular sword?
I was watching rurouni kenshin on my computer when I started to think. would a reverse blade sword be harder to control compared to a regular sword that would be able to just cut through the air. when the reverse blade would have the blunt end of the sword to go through the air.
yes you are right by putting the blade on the wrong side it does lose some of its aerodynamics and thus some if its speed control would not be much more of an issue also due to the way a katana is made the blade would not be as hard due to the way differential hardening affects the blades shape the ergonomics would be off if you did choose to cut with it possibly causing the blade to break more easily and as I said the blade part would be softer than normal so it would lose its edge more simply if you were to use it this all depends on the assumption that they are using traditional methods to make the sword. fighting with two blades facing you and none facing your opponent ... and finally that sword never existed in history it was just an interesting way for the pacifist character to carry a sword also in rl their were options for a person to avoid killing weaponwise
Dyson AirBlade
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.